Transparent Waterproof Glue + Brush (BUY 1 GET 1 FREE)

Water seeping through a wall crack or roof this monsoon? Seal it yourself, before the next rain.

💧 Stops seepage from cracks and joints

🖌️ Brush it on, dries fully clear

🏠 Works on walls, roof, bathroom and tiles

A transparent waterproof coating you brush straight onto the crack. It soaks in, seals the gap, and dries invisible, so a leaking wall or damp patch stops spreading, without breaking a single brick or calling a contractor.

Every monsoon it is the same story. A thin crack in the wall, a damp patch near the ceiling, a bathroom corner that never dries. First it is just a stain. Then the paint bubbles, the plaster loosens, and that ₹200 problem becomes a ₹5,000 waterproofing job.

Most people wait, because the usual fix means calling a contractor, breaking the surface, and days of mess. So the crack sits there and drinks in every rain.

It does not have to. A small crack, sealed early, stays a small crack.

Why this product

You do not need a mason, a machine, or a messy chemical mix. You need something you can brush on yourself in ten minutes, and let the coating do the rest.

• No breaking, no drilling. Seals the crack from the top. No smashing plaster or tiles.
• Dries fully transparent. No white patch, no yellowing. The wall looks normal, just sealed.
• Brush included. Everything you need is in the box. Open, stir, brush.
• One coat you can see working. The clear liquid soaks into the gap and hardens into a waterproof layer.

Benefits

• Seals hairline cracks, joints and gaps on walls and roofs
• Stops seepage and damp patches from spreading
• Dries clear, so repairs stay invisible
• Sticks to concrete, plaster, tile, wood, metal and PVC
• Holds up to rain, sun and moisture once fully cured
• Easy enough to do yourself, no contractor needed

Feature explainer

A brush-on waterproof coating, not a quick glue. This is a synthetic resin sealant. You brush it over the crack, it penetrates the gap, and it cures into a tough, water-resistant film. Because it goes on clear and thin, you can seal a visible wall or a bathroom joint without it ever showing.

• Works best on a clean, dry surface. Wipe off dust and loose paint first.
• Give it time to cure fully before the surface faces heavy water.
• Reseal deep or moving cracks with a second coat for a stronger layer.

How to use

1. Clean and dry the crack. Remove dust, loose paint and grease. The surface must be dry.
2. Brush on the first coat. Apply an even layer along the crack, brushing side to side.
3. Wait, then add a second coat. Let the first coat set for a few hours, then brush a second coat across it.
4. Let it cure. Give it a full day (about 24 hours) to harden before it faces heavy water or rain.

One honest note: this seals cracks, gaps and joints and stops surface seepage. It is not a fix for a burst pipe or major structural damage.